KS TOOLS
Brief Information: Tool cabinet with 7 drawers and 473 toolsGeneral Information: • 7 ball bearing drawer with 100% pull-out and capacity of
35 kg
• Enormous stability due to individual fastening of each
drawer
• 400 kg total load capacity
• Unpacking – immediately ready to use
The high-quality powder-coated BRILLIANT TOOLS professional
workshop trolley BT153473 is always there just when it’s
needed! Spending all day running back and forth is a thing
of the past! With help from the ergonomic push handle
integrated into the plastic tray, it’s quite easy to
manoeuvre through the workshop and protects the edges on the
corners from collisions. Thanks to its 2 parking brakes on
the swivel castors, it remains in place at its destination.
More room! The professional workshop trolley has seven
drawers. Two drawers are extra high and thus provide plenty
of space for drills and other large tools. With the hanging
slot on the side, additional storage space can be created
with the right brackets. All drawers are supported by ball
bearings and pull out 100% even at the maximum capacity of
35 kg. This means that getting to your tools is no problem
whatsoever. To make sure your professional workshop trolley
does not tip over, all drawers lock individually and can
also be secured with the central lock.
No more laborious assembly required! The professional
workshop trolley comes fully preassembled and with three
drawers installed. Unpack – and done! It is ready to use
immediately.
The search is now at an end! The 2-coloured foam inserts
make sure that your 473 tools are always in order and can be
reached immediately in the drawers. Missing tools are also
immediately apparent.
Everything you want ready to hand at all times can be kept
on the sturdy plastic tray. It has even more compartments
for screws, bits or other small tools.
The professional workshop trolley is used to the rough
handling of the workshop. With its ample equipment, you're
prepared for anything that might happen!
The professional workshop trolley in detail:
Total capacity: W 77 x H 97.5 x D 47 cmDrawer internal
dimensions: 5x 52.8 cm x 39.8 cm x 55 mm2x 52.8 x 39.8 x
13.5 cmTotal load capacity: 400 kgLoad capacity of each
drawer: 35 kgFull pull-out: YesBall-bearing: YesLocking
mechanism: IndividualCentral lock: on the side, 2 keysEdge
protection: PlasticCastor: 2 swivel castors, 2 fixed castors
The foam inserts in detail:
Drawer 1
Socket spanner, 170-piece:With 6.3 mm (1/4") drive:- 4, 4.5,
5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm, for each
hexagonal socket- Extra-long, 4, 5, 6, 7, 8, 9, 10 mm, for
each hexagonal socket- E4, E5, E6, E7, E8, for each Torx
E-socket- T-Profile T8, T9, T10, T15, T20, T25, T27, T30,
for each bit socket- Tamper-proof T-profile, TB8, TB9, TB10,
TB15, TB20, TB25, TB27, TB30, for each bit socket- Pozidriv
PZ0, PZ1, PZ2, for each bit socket- Hexagon, 3, 4, 5, 6 mm,
for each bit socket- Slotted, 4, 5.5, 6.5, 7 mm, for each
bit socket- Cross-head, PH0, PH1, PH2, for each bit socket-
For each 50 and 10 cm extension- 1 Universal joint- 1 rotary
handle, 15 cm- 1 1/4" reversible ratchet 14.5 cm, 72 teeth,
finely toothed- 1 slider, 11 cmwith 10 mm (3/8") drive:- 10,
11, 12, 13, 14, 15, 16, 17, 18, 19 mm, for each hexagonal
socket- Extra-long, 10, 11, 12, 13, 14, 15 mm, for each
hexagonal socket- E10, E11, E12, E14, E16, E18, for each
Torx E-socket- 1 extension, 12.5 cm- 1 3/8" reversible
ratchet, 20.5 cm, 72 teeth, finely toothed- 1 spark plug
socket, 18 mm- 1 bit adapter for 8 mm bits- 1 Universal
jointwith 12.5 mm (1/2") drive:- 10, 11, 12, 13, 14, 15, 16,
17, 18, 19, 20, 21, 22, 24, 27, 30, 32 mm, for each
hexagonal socket- Extra-long, 16, 17, 18, 19, 22 mm, for
each hexagonal socket- E20, E24 for each Torx E-socket- 16,
21 mm for each spark plug socket- 1 rotary handle, 25 cm- 1
extension, 12.5 cm- 1 1/2" reversible ratchet 25 cm, 72
teeth, finely toothed- 1 Universal joint- 1 bit adapter for
8 mm bits- Bits in 8 mm drive x 30 mm length:- Tamper-proof
Torx TB40, TB45, TB50, TB55, TB60, TB70 for each bit- Torx
T40, T45, T50, T55, T60, T70 for each bit- Hexagon, 7, 8,
10, 12, 14 mm for each bit- Cross-head, PH3, PH4 for each
bit- Slotted, 8, 10, 12 mm for each bit- Pozidriv PZ3, PZ4
for each bit- 1.27, 1.5, 2, 2.5, 3, 4, 5 mm for each
hexagonal socket- Bits in 6.3 mm (1/4") drive x 25 mm
length:- Spline M5, M6, M8 for each bit- T-profile T5, T6,
T7 for each bit- RIBE profile M5, M6, M7, M8, M9 for each
bit- Five star TS10, 15, 20, 25, 27, 30, 40, 45 for each
bit- Tamper-proof T-profile TB7 for each bit
Drawer 2
Screw spanner, 24-piece:- 16 combination spanners: 6, 7, 8,
9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22 mm- 8 ring
spanners, offset: 6x7, 8x9, 10x11, 12x13, 14x15, 16x17,
18x19, 20x22 mm
Drawer 3
Screwdrivers, 21-piece:-8 screwdrivers with hammer cap,
cross-head PH2x38 mm, PH1x75 mm, PH2x10 cm, PH3x15 cm,
slotted 6x38 mm, 5x75 mm, 6x10 cm, 8x15 cm-1 precision
mechanics screwdriver, PH0x10 cm-1 precision mechanics
screwdriver, slotted 3 mm x 10 cm-11 Torx screwdrivers,
T6x75 mm, T7x75 mm, T8x75 mm, T9x75 mm, T10x75 mm,
T15x10 cm, T20x10 cm, T25x10 cm, T27x10 cm, T30x10 cm,
T40x15 cm
Drawer 4
Right-angle wrenches 18-piece:-9 hexagonal socket
right-angle wrenches, 2x10 cm, 2,5x10 cm, 3x10 cm, 4x15 cm,
5x15 cm, 6x15 cm, 7x15 cm, 8x20 cm, 10x20 cm-9 Torx
right-angle wrenches, T10x75, T15x100, T20x100, T25x150,
T27x150, T30x150, T40x150, T45x200, T50x200 mm
Drawer 5
Ratchet ring spanners, 15-piece:-15 ratchet ring spanners 8,
9, 10, 11, 12, 13, 14, 15, 17, 19, 21, 22, 24, 27, 30 mm
Drawer 6
Pliers, hammer, chisel, 16-piece:-1x 300 g hammer each-1
needle-nose pliers, straight each-1 needle-nose pliers,
angled each-1 retaining ring pliers each for internal
retaining rings, straight-1 retaining ring pliers each for
internal retaining rings, angled-1 retaining ring pliers
each for external retaining ring, straight-1 retaining ring
pliers each for external retaining rings, angled-1
combination pliers each-1 side cutter each-6 pin punches,
1.5, 3, 4, 5, 6, 8 mm
