ABRO 412-AB Ultra Plus Black Silicone Gasket Maker 85g

ABRO Ultra Plus Black Gasket Maker is a specially formulated for import engines but can also be used on domestic engines. It is the ideal gasket replacement for cam or transmission covers, thermostat housings, intake manifold seals, oil pans and water pumps. Resists most automotive fluids expect gasoline.

412-AB Uses: Engines, Cam covers, Water pumps, Transmission pans.  

412-AB Features: Neutral cure/low odor. High temperature applications 343°C. Safe for sensors. Resists oil, water and anti-freeze. Non-corrosive.

412-AB Directions:

1. Mating surfaces should be free of dirt, grease, and oil. Remove old gasket material. Use care not to scratch softer metals.
2. Remove cap, puncture inner seal, screw on nozzle and cut to desired size.
3. Apply uniform, unbroken 1.5-3mm bead around perimeter of one surface online (preferably the cover side). Completely surround all bolt holes. Replace cap after use.
4. Wait 10 minutes of silicone to “skin over”. Press parts together. Tighten all retaining bolts to manufacture’s specified torque. Remove any excess gasket maker with a dry towel.