Grey 999®

RTV Silicone Gasket Maker

• Oxygen Sensor Safe

• Neutral Cure, Low Odor

• Effective Up to 650°F (343°C)

• Designed Specifically for Import Engines

ABRO 999 Gasket Maker is a specially formulated for import engines but can also be used on domestic engines. It is the ideal gasket replacement for cam or transmission covers, thermostat housings, intake manifold seals, oil pans and water pumps. Resists most automotive fluids expect gasoline.

Product Uses: Import engines

Product Directions:

1. Mating surfaces should be free of dirt, grease, and oil. Remove old gasket material. Use care not to scratch softer metals.
2. Remove cap, puncture inner seal, screw on nozzle and cut to desired size.
3. Apply uniform, unbroken 1.5-3mm bead around perimeter of one surface online (preferably the cover side). Completely surround all bolt holes. Replace cap after use.
4. Wait 10 minutes of silicone to “skin over”. Press parts together. Tighten all retaining bolts to manufacture’s specified torque. Remove any excess gasket maker with a dry towel.

42,5 g.