ERRECOM
SEALUP is the universal sealant essential to eliminate any leakage between the threads, the gaskets and the joints. SEALUP creates a flexible and resistant film that allows the reopening of the joint.
Caution: it must be applied on a clean surface to ensure maximum adhesion. For cleaning and the subsequent removal we recommend the usage of Thor, the Errecom spray.
Instructions
1. For best results, clean the application surfaces with Thor, the spray Errecom, and let it dry.
2. Apply a thin film of SEALUP on the entire circumference and on both joint.
3. Wait a minute.
4. Assemble and tighten as required.
5. When the product is dry the system can be put under pressure. SEALUP is ready for use after a cure time from 20 minutes to 24 hours, depending on the temperature and the size of the joint.
Disassembly Smontare con utensili convenzionali.
Cleaning Use Thor, the Errecom spray, to remove any residue of sealant.
TECHNICAL INFORMATION
Temperature: from -90°C to +200°C (-130°F ÷ +392°F).
Pressure: from full vacuum (-1 Bar) to 500 Bar (-15 psi ÷ 7252 psi).
APPLICATIONS SEALUP is effective on all metals and plastic materials, including: aluminum and aluminum alloys, iron, copper, brass, bronze, magnesium, carbon steel, stainless steel, galvanized surfaces, PVC, CPVC, ABS, glass fiber, polypropylene and polyvinyl fluoride.
